ESSENTIAL FUNCTIONS AND RESPONSIBILITY:
Design and develop seat comfort systems (seat heaters, comfort cools etc.) in direct contact with customer technical personal according to Gentherm APQP/PCP procedures as below:
依照捷温如下APQP/PCP流程，直接与客户技术人员交流，设计和开发包括座椅加热通风等功能的座椅舒适系统：
1. Design of heater/ VTB/Steering wheel heater: heater/通风袋/方向盘加热垫的设计
- Based on customer input- specification/ technical requirement / drawing/ 3D data …to prepare and release master design, create BOM, define package agreement;
- 根据客户输入-标准/技术规范/图纸/3D 数据 …来准备并发布 master 设计, 建立 BOM, 制定包装规范；
- Update design according to customer/ internal change during development;
- 在开发过程中根据客户新的输入/内部需求更新设计
- Invite meeting for design review;
- 召集设计评审会议；
- Design DFMEA;
- 准备DFMEA；
- Coordinate whole system-including Heater/ VTB/ ACT/ ECU(set point)/ Material/ Blower(size, rotate speed and others in case system required) to make sure system interface is compatible during development change;
- 协调开发更改过程中，各个接口-包括 加热垫/ 通风袋/ 线束/ 电子控制单元(调节温度值)/ 原材料/ 风扇(尺寸，转速和其他情况下系统要求)之间的配和及其他系统要求；
- Finalize significant and critical characteristics;
- 制定出SC/CC特性；
- Design interface parts between seat and system-including Heater/ VTB/ ACT/ Material/ Blower;
- 设计连接座椅和整个系统，包括Heater/VTB/ACT /Material/Blower的接口
2. Prototype: 样品
- Release prototype drawing and create BOM in PDM;
- 释放样品图纸并在PDM中建立 BOM 表
- Order prototypes;
- 订购样品；
- Participate sample production for each new level change for technical support;
- 参加每次新样品的生产以做技术支持；
- Analysis problems during prototyping and implement improvement into product design;
- 分析样品中的问题并实施到产品设计中；
- Support and evaluate for seat build for testing and customer show;
- 协助试验或者展椅的制作；
3. DV Test: DV试验
- Create and release DVP with Lab engineer and PM;
- 和试验工程师及PM一起制定并release DVP；
- Issue test request;
-填写试验申请；
- Submit test sample/ seats to Test lab according to timeplan;
- 按照试验时间提交试验样品/座椅
- Support test lab for testing set up;
- 协助试验工程师进行试验设置；
- Support test lab for related test equip build up;
- 协助试验工程师进行相关试验设备的制作；
- Support test lab for specification analysis;
- 协助试验工程师分析试验标准；
- Analysis test result and implement into design improvement;
- 进行试验分析用于设计改进；
4. Transfer design: 转移产品设计
- Invite meeting to evaluate master drawing and customer drawing from other location;
- 召集会议对转过来的图纸包括客户图纸进行评审；
- Feedback and coordinate technical change with lead designers of other location;
- 与主设计者反馈并协调技术更改；
5. Production Preparation准备生产
- Release production parts into PDM and copy into SAP, notify project team for maintain;
- 将要生产的parts释放到PDM，复制到SAP中，并通知project team进行产品维护
- Complete PVP;
- 完成PVP
- Create and release PVP with Lab engineer and PM;
- 和试验工程师及PM一起制定并release PVP；
- Issue test request;
- 填写试验申请；
- Submit test sample/ seats to Test lab according to timeplan;
- 按照试验时间提交试验样品/座椅
- Support test lab for testing set up;
- 协助试验工程师进行试验设置；
- Support test lab for related test equip build up;
协助试验工程师进行相关试验设备的制作；
- Support test lab for specification analysis;
协助试验工程师进行试验标准的理解；
- Analysis test result and implement into design improvement;
进行试验分析用于设计改进；
6. Trial Run: 试生产
- Participate trial run production of each start of process for technical support;
- 参与试生产每道工序的前期以提供技术支持；
- Analysis problems during trial run and improvement into product design;
- 分析试生产中的问题并实施到产品设计中；
- Zero Series / PPAP
- Participate Job 0 production for each new level change for technical support;
- 参与Job 0生产每道工序的前期以提供技术支持；
- Analysis problems during Job 0;
- 分析 Job 0生产中的问题；
- Create ECR and improvement into product design;
- 创建ECR并将改进实施到设计中；
• Design seat heaters/ comfort cools and prepare BOMs for calculation of new or updates quotations
设计加热垫/通风舒适系统，准备材料设计清单，对新产品进行报价或更新已有报价
• Collect and maintain project relevant information and inform the respective departments (sales, quality, order center etc.)
收集和维护项目的相关信息，通知销售，质量，订单中心等相关部门
• Participate in Gentherm local or global teams
参加捷温当地和全球的项目组
MINIMUM QUALIFICATIONS:
• Bachelor degree
学士学位
• Fluent English skill of speaking and wirting
流利的英语交流和书写
• Mechanical and/or Electrical Engineering
机械类或电气工程类专业/机械设计/自动化相关专业
• Know well about basic project management knowledge and give improvement suggestion through cost management/quality management/risk management
掌握项目管理基础，能够通过成本管理、质量管理以及风险管理对整个项目提出改善建议；
• Know well about the lean basic knowledge, identify the waste and lead relevant departments to do improvement work
掌握Lean Basic基础知识；并能有效识别浪费带领相关部门作出改善；
• Design the drawing independently
能够独立进行设计图纸制作
• 3-5 years’ working experiences as a product design engineer in mechanical field.
3-5年汽车行业产品设计经验
PREFERRED QUALIFICATIONS:
• Know well and applying the APQP、FMEA、 SPC、 MSA and PPAP of automotive industry quality tools
掌握APQP、FMEA、 SPC、 MSA和PPAP汽车行业质量工具知识以及应用；
• Know well about the SCIO software-FMEA
熟悉SCIO software-FMEA
• Know about the GD&T, and can identify the GC&T drawings/ GD&T
能够读懂产品GD&T的图纸
• Well applying the CAD、CATIA 、UG to finish the product and technical confirmation
能够熟练应用CAD、CATIA 、UG等工具完成产品需求与技术确认；
• Know well about the IATF 16949：2016 and design related terms requirements
熟悉IATF 16949：与设计相关的条款，了解客户需求;
• Know well about the tolling design and management process
熟悉工具设计，以及工具设备的管理流程;
TRAVEL: Travel to work related supplier sites 出差到相关供应商
LEADERSHIP RESPONSIBLITIES: None
EMPLOYEE VALUE PROPOSITION OF GENTHERM:
• GLOBAL EXPOSURE: Across the world, Gentherm creates an inclusive work environment for all.
• HEALTH & WELLNESS: Perks in and out of the office to help you get the most out if life.
• ACCESSIBLE LEADERSHIP: The walls are torn down and the playing field is level. We're all working toward the same goals.
• TIME OFF: Recharge with generous paid time off, holidays and more.
• EMPLOYEE DISCOUNTS: Get more for your money with savings at many of the world's top retailers.
• TRAINING & EDUCATION: Our investment in your growth goes beyond what happens in the office.